Hardware for a 3 or 5 Battery Configuration Inside a PWRcell Battery Cabinet

Hardware to Upgrade Battery Capacity to Either 4 or 6 (From 3 or 5) Inside a PWRcell Battery Cabinet

Compatible with PWRcell Inverters and SnapRS Disconnect Switches, MC4, Max 420Voc

NEMA 3R, Outdoor Rated, Requires 3-6 PWRcell Battery Modules (Purchased Separately)

ATS, With Load Management for up to 4 HVAC Loads (24VAC Controlled), Non Service Rated, Critical Loads Panel Backup, NEMA 3R, 100A

ATS, With Load Management for up to 4 HVAC Loads (24VAC Controlled), Service Rated, Whole Home Backup, NEMA 3R, 100A

SMM, for Automatic Load Shedding, SMM, for Automatic Load Shedding, Use With PWRcell Automatic Transfer Switch, 50A

SMM, for Automatic Load Shedding, Use With PWRcell Automatic Transfer Switch, 100A

3.0 kWh Useable, Extended Temperature Range

In-Line Module Level Rapid Shutdown Device with MC4 Connectors, Requires Generac PWRcell Inverter and PV-Link Optimizer(s)

7.6kW, Single Phase, 120/240VAC, Grid-Tie/Back-Up, with 2 CT’s, UL1741-SA (Rule-21)