MidNite Solar MNE250STM-L-240 E-Panel
250A, 120/240VAC, White Steel for Magnum Inverter
 |
| This item ships free within the 48 contiguous states. |
MidNite Solar MNE250STM-L-240 E-Panel, 250A, 120/240VAC, White Steel for Magnum Inverter
White aluminum configured for 120/240 VAC in and out for a Magnum MS4024 inverter. This inverter (not included) features true 120/240 input and output, meaning you no longer need two inverters to fully utilize your 240 VAC generator. It also provides 120/240 VAC operation without the need for transformers or a second inverter.
The E-Panel also has a separate PV input terminal block that provides a place to tie in your PV input breaker, PV input and a PV lightning arrestor. There is also a terminal bus bar for the battery plus as well as as battery minus. No more need for ring terminals for these hook ups.
One of the best features of the MidNite E-Panel is the ability to complete much of the installation wiring right in the shop while the E-Panel is on the bench. You can connect your PV control breakers, lightning arrestors, battery status monitor, DC load circuits and AC load circuits before heading out the job site. This greatly reduces the chance of forgetting something at a location that is usually far away from the nearest store.
The MidNite Solar E-Panel comes standard with the basic over-current protection and disconnects required to install your renewable energy system. It can also expand to grow as your needs arise.
Inverter installation has just gone from hours to minutes with MidNite Solar's E-Panel. These disconnect boxes can easily be stacked horizontally or vertically to save space
Breaker: 250 Amp 125 VDC
Material: White steel for 120/240VAC In & Out for MS4024-PAE.
Left Side Hinge: hinge on left, circuit
breakers on the left and charge control bracket on the right.
Dimensions: 25"L x 16"W x 5"D
Weight: 42 lbs (19.1 kg)
Includes
- DC Inverter battery breaker
- Internal inverter cables
- Pre-wired 50 amp 240 VAC rated Inverter AC bypass switch
- Pre-wired 50 amp 240 VAC rated AC Input disconnect
- 500 amp shunt
- AC terminal blocks
- Heavy duty 175 amp AC distribution block
- DC positive and and DC negative bus bars
- Terminal bus bars for 120/240 VAC input and output
- Din rails with 6 slots
- DC wiring cover
- Top shield
- Remote mounting hardware
- Wall mounting brackets
- Charge control bracket (CCB)
- Lots of hardware and grommets
- Knockouts for AC and DC conduits
- Cut outs for two GFCI outlets
Features
- Small size compared to existing disconnect and over current solution
- Pre-wired to save time, money and complexity
- All field wiring connections clearly labeled
- Easily expands to accommodate additional inverters
- Six slots for din rail breakers, PV, Wind, Hydro, AC distribution
- Bus bars for Battery Plus, Battery Minus and ground
- ETL listed to UL and Canadian standards
All E-Panels now come with a side plate that accommodates up to three panel mount breakers like the MNEDC80.
- Generally all of our products are in stock and ready to ship within 2 business days.
- If an item you ordered is out of stock, we will contact you within 1 business day with an expected ship date. You will then have the option to accept the new ship date or cancel your order.
- Either way, we guarantee your card will never be charged until your order ships.