MidNite Solar MNE250SMA-SLAVE E-Panel

MidNite Solar MNE250SMA-SLAVE E-Panel, 250ADC, No Bypass, Yellow Aluminum for SMA Sunny Island Slave Inverter, No Relay

Companion E-Panel for dual, triple and quad Sunny Island inverter systems. The Slave E-Panel is the same part number for all multiple SMA E-Panel systems regardless of off-grid, AC coupled, battery backup, 3 phase or quad.

This E-Panel does not include any AC Output/Bypass system.

Includes

• Separate 60amp, 120/240vac AC input and output breakers for the slave inverter
• 250amp battery breaker with inverter cables
• 500amp/50mV shunt
• Battery negative busbar
• AC input and Output busbars
• Neutral and ground busbars
• AC input and output wiring
• Additional black and blue insulators included for tailoring to suit the application.

Features

• All breakers are hydraulic-magnetic and rated for continuous duty.
• Space provided for 6 additional 1/2" wide din rail mount AC or DC breakers and up to 12 3/4" wide panel mount breakers.
• Mounting hole spaces for additional terminal busbars.
• Knockouts located for battery cables, lightning protection and AC conduit connections.
• Comes with Red busbars installed.

Recommendations: Classic Charge controller wiring for off-grid or battery backup grid tie installations. To add Classic charge controller wiring, add the bold text to the Shipping Instructions Box during checkout. CL150-1X, CL150-2X, CL200-250-1X, CL200-250-2X. Includes all wiring, input and output breakers, mounting plates and hardware. Installed and pre-wired.

NOTE: A back plate (MNESMA-Short BP or MNESMA-Tall-BP) is recommended for the proper wiring alignment of the Sunny Island.

NOTE: Classic charge controllers are sold separately.