Gabor L 11.78kW Grid-Tied Roof Mount

Mission Solar MSE60A310 Solar Panels, SolarEdge SE7600H-US Inverter, P320-5NC4ARS Power Optimizers, IronRidge XR-100 Roof Mount Hardware.

"Ordering and working with RESSupply for my 38 310w panel system was an awesome experience. I went with a SolarEdge inverter that allows 155% oversizing on the DC side. So the 7.6kWAC inverter has the potential of 11.8kW of DC input. Given the orientation of my roof this design has worked out marvelously and allowed me to be 100% self sufficient even into the short days of December. I can report back once December is done. The materials from RESSupply arrived packaged well and on schedule. Installation was a bit complicated by the two story roof but a lower roof provided access to the upper story and made staging the panel's 1/2 way up possible. This was my second install but first on a composition shingle roof and overall it was straight forward and without issue."

"Since I had two Tesla Powerwalls installed at the same time there was a bit of "revision" work that had to go into my permit application in order to get the final state of the system before I could pass inspection. I did all the changes myself as well as the permitting and all the Solar PV wiring. Nevada County handled everything via their online portal which made it very east."

"The system has been amazing and provides us with continuous power shielding us from PGE blackouts this fall."

"Coupling Solar with Battery Storage is the way to go and I would encourage every Solar install to consider adding battery storage. Given the net metering changes and the reduced value of any excess kWhrs produced, using them during peak times and all night is a game changer."

Project Photos