MidNite Solar MNSPD-600 Surge Protector Device
3-Wire, 600VDC/485VAC, For Grid-Tied Combiners and Inverter Input Circuits
 |  |
 |
MidNite Solar MNSPD-600 Surge Protector Device, 3-Wire, 600VDC/485VAC, For Grid-Tied Combiners and Inverter Input Circuits
Protection for Grid-Tie PV Combiners and Inverter Input Circuits.
The MidNite Solar Surge Protective Device (MNSPD) is a Type 2 device per UL1449 rev3 and is designed for indoor and outdoor 4X applications. Engineered for both AC and DC electric systems, it protects both transformer and transformer-less inverters without interfering with the GFP protection circuit. It provides protection to service panels, load centers or where the SPD is directly connected to the electronic device requiring protection. Maximum protection will only be achieved if the SPD is properly installed. Please read the installation manual carefully and follow the instructions.
The MidNite Solar SPD is offered in three different voltages to maximize the required protection level. Protection is achieved by reducing the clamping voltage to a safe voltage that your system can sustain without damaging any electronics in the system.
The MidNite Solar SPD voltage rating should be chosen according to the nominal voltage of the system. Do not install an SPD with Maximum Continuous Operating Voltage (MCOV) below the nominal voltage of the system; this will deteriorate the SPD and making it unavailable when you most need it.
Size: 3.8" Wx 4.4"L x 3.5"D
Introduction to the Surge Protection Device
Installing the Surge Protection Device
- Generally all of our products are in stock and ready to ship within 2 business days.
- If an item you ordered is out of stock, we will contact you within 1 business day with an expected ship date. You will then have the option to accept the new ship date or cancel your order.
- Either way, we guarantee your card will never be charged until your order ships.