Trojan Battery 210113 Single-Point Battery Watering Kit
48V, for SPRE 2V Battery, with Tubing, Vents with Valves, Hand Pump and Manual
- Item # 1810-012
Trojan Battery 210113 Single-Point Battery Watering Kit, 48V, for SPRE 2V Battery, with Tubing, Vents with Valves, Hand Pump and Manual
Proper maintenance and periodic watering are important factors in maximizing the performance and life of Trojan deep-cycle, flooded batteries. Battery maintenance can be a costly, time-consuming and messy job. With the Single-Point Watering Kit, precise battery watering is made easy, saving valuable time and money.
The Trojan Battery 210113 Single-Point Battery Watering Kit is designed to work with flooded deep-cycle batteries and takes the guess work out of properly watering flooded batteries. The included flexible tube routing allows the watering system to work with various 48V battery banks and configurations.
This kit is designed for a single string installation with Trojan SPRE 02 1255 Premium flooded batteries*. For systems with multiple strings in parallel, simply order multiple kits at the required system voltage. This Single-Point Watering Kit also comes in two other configurations for 12V and 24V systems and there are also three other kits designed for the Trojan Industrial Line (12V, 24V and 48V). The Industrial Line watering kit and the Premium and Signature Line watering line kits use different sized vent caps. A vent cap for the Industrial Line will not work with the Premium and Signature line batteries and vice versa.
Maintaining the proper electrolyte level can extend the performance and life of Trojan flooded batteries. However, determining the correct level can be a challenge. The 210113 Single-Point Battery Watering Kit takes the guess work out of the maintenance process by including automatic shut-off valves that replace the existing vent caps which are interconnected with tubing. A quick coupling allows the system to be connected to a water supply. Once the watering system is installed, water flows into each battery cell until it reaches the correct level. A flow indicator built into the water supply tells the operator when filling has been completed. The entire process generally takes just 30 seconds per battery.
You can extend battery life and performance with the 210113 Single-Point Battery Watering Kit with proper watering. Overfilling a battery can result in loss of acid, while charging with low electrolyte levels can result in permanent damage to the lead plates. Both can result in loss of capacity and life expectancy. The Single-Point Watering Kit is also very safe, allowing you to fill your deep-cycle batteries without having to remove the vent covers, avoiding battery acid burns, ruined clothing and noxious fumes.
*The Single-Point Watering Kit is compatible with all Trojan Industrial, Premium, and Signature Line flooded batteries except models 24TMX, 27TMX, 27TMH and 30XHS.
- (72) Yellow Vents with Valves
- (24') Tubing
- (3) Supply Tube Assemblies
- (9) Red End Caps
- Installation Instructions
- (1) Hand Pump Assembly
- Generally all of our products are in stock and ready to ship within 2 business days.
- If an item you ordered is out of stock, we will contact you within 1 business day with an expected ship date. You will then have the option to accept the new ship date or cancel your order.
- Either way, we guarantee your card will never be charged until your order ships.